How To Cover Wood Cabinets: A Step-By-Step Guide

Particleboard versus Plywood from inspiredkitchendesign.com

Introduction

Wood cabinets are a popular choice for many homeowners due to their durability and timeless appeal. However, over time, they may start to look outdated or worn out, leaving you with the need to give them a fresh new look. One of the easiest and most cost-effective ways to achieve this is by covering them. In this article, we will provide you with a step-by-step guide on how to cover wood cabinets.

Step 1: Preparation

Before you begin the process of covering your wood cabinets, you need to prepare the surface. This involves cleaning them thoroughly to remove any dirt or grease buildup. You can use a mixture of warm water and mild detergent to do this. Once you have cleaned the cabinets, allow them to dry completely.

Step 2: Choose your Covering Material

There are various materials you can use to cover your wood cabinets, such as wallpaper, contact paper, or adhesive vinyl. Each material has its own unique advantages and disadvantages. For instance, wallpaper is a great option if you want to add a pattern or texture to your cabinets. Contact paper, on the other hand, is easy to install and remove, making it ideal for renters.

Step 3: Measure your Cabinets

To ensure that you have enough covering material to complete the project, you need to measure your cabinets accurately. Use a measuring tape to determine the length and width of each cabinet. Once you have the measurements, add an extra inch or two to each dimension to allow for trimming and adjustments.

Step 4: Cut the Covering Material

Using the measurements you took in step 3, cut the covering material to the appropriate size. Make sure that you leave extra material on the edges to allow for trimming and adjustments.

Step 5: Apply the Covering Material

Now that you have cut the covering material to the appropriate size, it's time to apply it to your cabinets. Start by peeling off the backing paper or protective film from the material. Then, carefully position the material on the cabinet, making sure that it is straight and aligned properly.

Step 6: Smooth out the Material

Once you have applied the covering material, use a plastic squeegee or a credit card to smooth out any air bubbles or wrinkles. Start from the center and work your way outwards. Make sure that the material is firmly adhered to the cabinet surface.

Step 7: Trim the Edges

After smoothing out the material, use a sharp utility knife or scissors to trim the excess material from the edges. Be careful not to cut too close to the cabinet surface.

Step 8: Repeat the Process

Repeat the process for each cabinet until you have covered them all. Take your time and work carefully to ensure that you achieve a smooth and even finish.

Step 9: Add Finishing Touches

Once you have covered your cabinets, you can add some finishing touches to complete the look. For instance, you can replace the cabinet handles or knobs with new ones that complement the new covering material.

Step 10: Enjoy your New Cabinets

Now that you have covered your wood cabinets, you can enjoy your new and improved kitchen or bathroom. The covering material will provide a fresh new look that will last for years to come. In conclusion, covering wood cabinets is a simple and cost-effective way to give them a fresh new look. By following these steps, you can achieve a smooth and even finish that will enhance the beauty of your home.

Source: www.homecrestcabinetry.com

Source: 31diy.blogspot.ca

Source: custommade.com